Constructed in stainless steel, TYGA Performance combine modern technology and traditional techniques to bring you the best in two stroke chamber design. With the help of advance computer software, and extensive dyno and track testing, we are able to design the optimum chambers for your model motorcycle. Chamber sections are laser cut but this is where the automation ends. All chambers are hand rolled and welded by expert craftsmen to give the level of perfection that you'd expect when purchasing a TYGA Performance exhaust system.
For more information on how to get the best power out of this system, combine it with other parts of our MC21 Power Up Kit (see under 'technicical help' on left hand menu) to give your bike a massive power increase. In addition to performance, the chambers will enhance the bike's appearance and save weight too. There is no need to compromise with fit either. The chambers are designed to give clearance to the swing arm and stock footpeg hangers as well as work with our Tyga Performance step kit STAA-0002. The stock bodywork does not need to be cut, (though repositioning of rear lower cowling down by 25mm is recommended)
NEW! Our latest design, is provided with silencers clamping hardware which mounts directly to the stock MC21 silencer stays for a more secure and firm installation.
Please note this product fits MC21 only. For MC28, please select EXCS-0005B
This product, EXCS-0005A, has one chamber exiting left and one chamber exiting on the right.
Parts included with this product:
1 x left side chamber, side by side (left exiting) stainless steel
1 x right side chamber, side by side (right exiting) stainless steel
2 x silencer single clamps and mounting bolts, washers and nuts
2 x manifolds
2 x mounting flanges
4 x mounting springs
Not included are the silencers.
Important! To complete your Tyga exhaust system remember to order 2 silencers with every chamber set
This product contains the following items:|
|4 x || (EXSG-0001) Spring, Exhaust, Two Stroke|| $1.62US|
|2 x || (EXCL-0009) Clamp, Single, 60mm, Offset|| $8.62US|
|2 x || (EXMC-0001) Clamp, Manifold, NSR150/250|| $16.62US|
|2 x || (EXMN-0003) Collar, Manifold, NSR250|| $23.25US|
|1 x || (EXCB-0005L) Exhaust Chamber, Left, Side By Side Type, MC21/28|| $310.63US|
|1 x || (EXCB-0005RA) Exhaust Chamber, Right, Stainless Steel, MC21|| $310.63US|
Cost of separate parts: $724.71US
|You save $121.72US|